Orange and amber colors are more or less the same. They just get called different parts of the world. Considering this, whether you are experiencing the Netgear extender orange light issue or amber light issue, know that it means the same thing. We understand what a mess it can cause in the mind especially if this issue starts following you right after you have performed new extender setup. With that in mind, we have penned down this post.
Taking this into account, it is recommended that you walk through the troubleshooting tips discussed in this article. By the time, you have reached the last solution; the LED light on your device which is flashing orange would have turned green. Continue reading.
How to Turn Netgear Extender Orange Light to Green?
1. Check the WiFi Extender Firmware
The orange light issue usually occurs because of connectivity issues. These issues arise when the firmware of your Netgear wireless extender is running on an outdated version. Given this, you should not think twice before updating the firmware of your networking device to its latest version. You can execute this process either using the web user interface or the Netgear Nighthawk application.
Now, the main question arises, i.e. how to perform Netgear extender firmware update using any of these methods? Well, the answer to this question is quite simple, i.e. read the steps given in the user manual of your networking device.
2. Switch to a Cable Connection
The second factor that might have contributed to the Netgear extender orange or amber light issue is the usage of the wrong source of connection. Have you connected the devices via the WPS method during the setup? Well, great choice no doubt, but not a reliable one. We are saying this because the connection can drop at any hour of the day if the extender and router are connected wirelessly.
To take care of the problem, it is recommended that you switch the wireless source to a wired source. In simple words, use an Ethernet cable to connect the networking devices. Make sure that it is not damaged from any point.
3. Keep Electronic Devices at Bay
To simplify this subheading, electronic devices emit radio waves which are not good for the overall functioning of your networking device. This is because they tend to interrupt the signals emitted from your Netgear wireless range extender. Taking this into consideration, you should get rid of electronic devices. Of course, you cannot throw them away. All you can do is, change the location of your networking device.
Apart from this, do not keep the extender near transmitting appliances like refrigerators, washing machines, treadmills, televisions, microwave ovens, Bluetooth speakers, baby monitors, cordless phones, and much more.
4. Reset the Netgear WiFi Extender
In case not even one hack was successful in fully helping you to resolve the Netgear extender orange or amber light issue, then the only solution left for you is to reset or restore your device to its default factory mode. The same can be done if you locate and press the reset button located on the networking device. Pressing it should only be done with the help of an oil pin or a paper clip. Do not use the tip of a pen for this purpose.
Right after you are done performing Netgear extender reset, set up the device from scratch using the mywifiext.net web address. In case, www.mywifiext.net refused to connect, then use the IP address to configure the wireless range extender.
Conclusion
This ends the article talking about the various solutions that can be put to use to resolve the Netgear extender orange or amber light issue. We are expecting that with their help, you will be able to change the status of the LED from orange to green. Once that is done, feel free to enjoy a blazing-fast and seamless internet connection on your client devices which are connected to the network of the wireless range extender.
